 Sprague
Products offers
a variety of industrial hydraulic pumps or various liquid output pressure up to 33,500 psi (2311 bar). Sprague Products pumps service water, oil and most corrosive chemicals. Sprague Products pumps are rugged, service-proven and virtually maintenance-free. The Sprague Products positive-displacement type pump converts air inlet pressure to hydraulic output pressure. The pump uses low pressure air to act on a large area piston to produce high hydraulic pressure with a small area piston.
The Sprague Products Gas
Booster,
like Sprague Product air-driven
hydraulic pumps, employ the
piston differential areas principle
- a large area air piston,
driven at  low
air pressure to drive a small
area compression piston which
converts input gas to higher
pressure, lower volume output
gas. The booster gas output
or discharge pressure developed
by the compression piston is
determined by the ratio between
the area of the air piston,
the operating air pressure
and the available pre charge
pressure. The function of the
pre charge pressure to the booster
is to charge the high pressure
cylinder inside the booster
with gas, reducing the time
required to reach higher pressures,
and the time to return the
compression piston and the
air piston for the next compression
cycle. Discover more about Sprague Products.
For
over 60 years, Farris
Engineering has
been a leader in the design and manufacture
of spring loaded and pilot operated
pressure relief valves. Used as safety
devices, our valves protect processes,
personnel and the  environment against
process disruption. Farris Engineering
is recognized as a pressure relief
solution provider to the energy,
oil & gas production, petrochemical,
chemical process, defense and industrial
markets worldwide.
Valve solutions include the 2600
Series. The 2600 Series valves
are ASME certified for air, steam
and water use. With Steel body and
bonnet with stainless steel trim
the 2600 is available in sized from
1' x 2" to 20" x 24".
Effective orifice areas from 0.110
to 159 square inches, pressures from
15 psig to 6000 psi, an temperature
range from 450 °F to +1500 °F.
Optional materials of construction
include complete 316 stainless steel,
Monel and Hastelloy C, compliant
with NACE standards. Other industrial
valve solutions include the 2700
Series and the 3800 Series. |
